Motor torque, bike mass: the E-Force is built to handle both.

ASSEMBLED IN FRANCE

CARBON WHEELS
FOR E-MTB

Motor torque, bike mass: the E-Force is built to handle both.

Motor torque, bike mass: the E-Force is built to handle both.

WHY ARE ALUMINIUM RIMS FOR E-MTB OUTDATED?

01

Rims can't withstand the instant motor torque (85–90 Nm)

02

Lateral flex under electric power robs you of energy

03

Under 24–26 kg of dynamic load, alloy rims warp

04

Asymmetric spoke tension degrades — spokes come loose on their own

E-FORCE

Carbon at the service of electric

BUILT FOR ELECTRIC

An e-MTB is not a regular bike with a motor bolted on. The motor delivers instant torque — up to 85–90 Nm with Bosch or Shimano EP8 motors. That impulse transfers directly through the hub and into the rim via the spokes. A standard wheel isn't built for that. The E-Force is. Behind it all: custom Bitex × Shore Carbon hubs, engineered to take whatever you throw at them.

E-Force détail

6 LAYERS T700 — NOT ONE LESS

Building an e-MTB wheel means choosing the right fibre in the right place. We use T700 carbon — the same fibre used in aerospace — laid up in 6 strategic layers. One extra layer was added where motor torque hits hardest: at the spoke bed. The result: a rim that absorbs repeated power-assisted accelerations without carbon fatigue.

ASYMMETRIC PROFILE — MORE THAN AESTHETICS

The rear wheel's spoke geometry isn't symmetrical: the cassette side forces a tighter spoke angle. On an e-MTB, motor torque amplifies that imbalance. Our asymmetric rim profile compensates for this angle difference — spoke tension equalises on both sides, the wheel stays true longer, and lateral stiffness stays consistent through every electric-assisted surge.

E-Force en action
Solidité E-Force

85–90 NM — THE PHYSICS ARGUMENT

Instant motor torque is the number one stress your wheels face. 85 Nm on a Bosch CX, 90 Nm on a Shimano EP8: every acceleration sends this force through the hub and into the rim. A standard rim flexes and loses energy. The E-Force, with its high horizontal rigidity, transfers that power cleanly — no parasitic flex, no wasted effort. Less flex = more performance = more fun.

Flancs E-Force

30.5 MM — THE SWEET SPOT FOR YOUR TYRES

E-MTB enduro tyres run between 2.4" and 2.6" for grip and impact absorption. A 30.5 mm internal width matches this window perfectly: the tyre opens up, the sidewall is supported, the contact patch is maximised. Too narrow and the tyre balloons, losing cornering grip. Too wide and the sidewalls go limp under load. 30.5 mm is the perfect balance between agility and stability.

6+1layers of T700 carbon per rim

PRESSURE — ON YOUR TERMS

With 6 layers of T700 carbon, you can run as low as 25 PSI without fear of warping the rim — even at 100 kg rider weight. Dial in pressure for your size, your style, your terrain. That's the freedom of carbon: a rim that adapts to you, not the other way around.

E-Force design

HELLO BEAUTIFUL

We put a lot of thought into the design to make it look exactly the way we wanted, and we're thrilled with the result. The shapes are perfect — subtle but not too much. A wheel that will be with you for a long time.

FOR EVERY DAY...

We know how intensively you use your e-MTBs: more rides, more kilometres. E-Force will be there for every ride.

... AND FOR ALL YOUR ADVENTURES

900 kilometres of rough terrain takes its toll. E-Force rims are designed to hold their shape and spoke tension, ride after ride. As with the EnduroEdge, a check every ten rides is recommended.

Matte BlackMatte Black
Glossy BlackGlossy Black
E-Force riding

THEY RIDE THEM, THEY LOVE THEM

"I ride an e-MTB and genuinely recommend these wheels — they're solid and stunning"

— Cyril

"Super solid build, cool packaging, light enough to keep the bike feeling playful. The grip and control in corners is unreal"

— Jamie

"I've noticed a big difference in cornering grip and power transfer. The stiffness really makes the bike more responsive"

— Liam

ENVIRONMENTAL IMPACT

Here is the impact that producing one of our wheels has on the planet. Obviously, we do everything we can to minimise it.

98.2kg CO₂

Equivalent to 1,744 km driven by car

23L of water

Equivalent to 4 showers of 7 minutes

158.7MJ

Equivalent to 58h of apartment heating

TECHNICAL DETAILS

TYPE

DisciplineE-MTB
Terrain FeelHigh, this rim provides support and stiffness
Vertical RigidityHigh
Horizontal RigidityHigh

WHEELS

Weight (pair)1,820 grams
Front Hub AxleBoost 15x110mm, Boost 20x110mm
Rear Hub Axle12x142mm, 12x148mm, 12x150mm, 12x157mm
SpokesDT Swiss Champion, DT Swiss Competition, DT Swiss Competition Race
Recommended Tyres2" – 2.7"
Recommended Pressure25 – 50 psi

RIMS

MaterialT700 Carbon Fibre
ProfileAsymmetric
Weight (unit)460 grams
Spoke Holes28 Front / 32 Rear
External Width38.5 mm
Internal Width30.5 mm

HUBS (BITEX)

Front HubBITEX X SHORE-CARBON EN61SC BX-F SERIES
Rear HubBITEX X SHORE-CARBON EN12SC BX-R SERIES
Front Weight180 grams
Rear Weight360 grams
Engagement Points56
MaterialAluminium
Disc Mount6-bolt, Center Lock
FreehubShimano MTB, SRAM XD
AxlesReinforced steel

E-Force Carbon Wheelset

★ 4.9/5SEE 10 REVIEWS
From€1,099or 4 × €274.75 interest-free with PayPal
✓ Made to order · Free shipping in France
▾
▾
▾
▾
Made to order: delivered in ~4 to 6 weeks

3-year warranty + lifetime Crash Replacement

  • 3 years against manufacturing defects on carbon rims
  • Accidental breakage: 50% off the bare replacement rim

Pay in 4 interest-free instalments with PayPal (subject to PayPal approval)

Free shipping in France on orders over €450

Not sure which build to choose?

Tell me about your bike and your riding, I will help you pick the right hubs and spokes.

THE COMMUNITY

They ride Shore.

A growing community of riders. Tag @shore.carbon to join the family.