DH139: Our New Downhill Rim, Wider and More Refined
In downhill, a rim doesn't break because it's too light. It breaks because it wasn't designed for what the track throws at it. The DH139 was built the other way around.
The DH139 takes over from the DH129 at the top of our downhill range. Wider (31 mm internal) and built from dual-fibre Toray T700 + T800 carbon, it's made for modern DH tyres and tracks that forgive nothing.
What a downhill track really does to your wheel
A downhill wheel takes violent, repeated impacts at speeds where the smallest deformation costs you. Rock gardens, flat landings, square edges hit at 50 km/h: every load sends a force into the rim that few materials survive hundreds of times per run without marking.
Add the lateral loads from berms and off-camber turns, which twist the wheel on an axis where the carbon has to stay straight. That's where most standard rims eventually fatigue.
In downhill, weight is not the enemy. A DH rim has to prioritise strength and long-term durability first. Saving 40 g at the cost of a rim that cracks on the third run makes no sense.
What makes the DH139 different
Dual-fibre T700 + T800: stiffness where it's needed
The DH139 combines two carbons. T700 brings resilience and impact absorption, while the higher-modulus T800 brings stiffness and impact resistance. Placed at the right points of the profile, they do a job neither could do alone.
The result: controlled stiffness that takes hits without permanently deforming. The rim absorbs, returns, and doesn't carry the memory of the previous impact.
Asymmetric profile: balanced spoke tension
With a 2 mm offset, the DH139 rebalances the spoke geometry. On a rear wheel, the dish created by the cassette naturally unbalances spoke tension. The asymmetry compensates: better-tensioned spokes on both sides, a more durable wheel.
31 mm internal: built for DH tyres from 2.4 to 2.7"
The DH139 moves to 31 mm internal width, up from 29 mm on the DH129. That width supports the casings of modern DH tyres in 2.4" to 2.7": the tyre holds its shape when loaded, folds less on the sidewalls and stays stable even at low pressure.
Too narrow, the tyre balloons and becomes unpredictable on edge. The DH139's 31 mm keep the casing open: more grip, more stability, and the freedom to run lower pressure without rolling the tyre off the rim.
27.5" or 29": choose by your terrain
For playful, technical and choppy tracks. Quicker to change direction, easier to place in tight sections and to send in the air.
For fast, rough tracks. Rolls over everything, keeps speed and forgives imperfect lines. The modern DH standard.
DH139 Rim — Full specifications
What it changes, once you're up to speed
The DH139 shows up first as confidence. In a berm, horizontal stiffness keeps the wheel straight under load, without the vague feel that lets the tyre wash out. On braking bumps and rough sections, the rim absorbs the vibration instead of firing it back into your hands.
At low pressure, the 31 mm width keeps the tyre stable instead of letting it roll on the rim. You can drop pressure for grip without giving up precision.
One important note: the DH139 is hookless. Respect the maximum pressure of 30 psi (2 bar) with compatible tubeless tyres. And if it still breaks on an impact, the Lifetime Crash Replacement has you covered.
The DH139 is available
As a bare rim for your own build, or laced onto the complete Anvil wheelset, hand-built in France.

